IEC TR 60601-4-1:2017-Medical electrical equipment-Part 4-1: Guidance and interpretation-Medical electrical equipment and medical electrical systems employing a degree of autonomy, IEC 60512-2-6:2002-Connectors for electronic equipment-Tests and measurements-Part 2-6: Electrical continuity and contact resistance tests-Test 2f: Housing (shell) electrical continuity, IEC 61892-3:2019-Mobile and fixed offshore units-Electrical installations-Part 3: Equipment, IEC 60335-2-69:2021-Household and similar electrical appliances-Safety-Part 2-69: Particular requirements for wet and dry vacuum cleaners, IEC 60092-101:2018-Electrical installations in ships-Part 101: Definitions and general requirements, IEC 60601-2-68:2014-Medical electrical equipment-Part 2-68: Particular requirements for the basic safety and essential performance of X-ray-based image-guided radiotherapy equipment for use with electron accelerators, IEC 61326-2-4:2020-Electrical equipment for measurement, IEC 60674-3-1:1998+AMD1:2011 CSV-Plastic films for electrical purposes-Part 3: Specifications for individual materials-Sheet 1: Biaxially oriented polypropylene (PP) films for capacitors, IEC 60335-2-98:2002+AMD1:2004 CSV-Household and similar electrical appliances-Safety-Part 2-98: Particular requirements for humidifiers, IEC 60999-1:1999-Connecting devices-Electrical copper conductors-Safety requirements for screw-type and screwless-type clamping units-Part 1: General requirements and particular requirements for clamping units for conductors from 0. Check out this IEC 60027-6:2006-Letter symbols to be used in electrical technology-Part 6: Control technology for official recommendations.
IEC 61076-3-124:2019-Connectors for electrical and electronic equipment-Product requirements-Part 3-124: Rectangular connectors-Detail specification for 10-way, IEC 60674-3-8:2011-Plastic films for electrical purposes-Part 3: Specifications for individual materials-Sheet 8: Balanced biaxially oriented polyethylene naphthalate (PEN) films used for electrical insulation, IEC 60335-2-98:2002/AMD1:2004-Amendment 1-Household and similar electrical appliances-Safety-Part 2-98: Particular requirements for humidifiers, IEC 60335-2-114:2018-Household and similar electrical appliances-Safety-Part 2-114: Particular requirements for self-balancing personal transport devices for use with batteries containing alkaline or other non-acid electrolytes, IEC 60893-3-5:2003/AMD1:2009-Amendment 1-Insulating materials-Industrial rigid laminated sheets based on thermosetting resins for electrical purposes-Part 3-5: Specifications for individual materials-Requirements for rigid laminated sheets based on polyester resins, IEC 60730-2-5:2013-Automatic electrical controls-Part 2-5: Particular requirements for automatic electrical burner control systems, IEC 60601-2-20:2009-Medical electrical equipment-Part 2-20: Particular requirements for the basic safety and essential performance of infant transport incubators, IEC 60364-4-43:2008-Low-voltage electrical installations-Part 4-43: Protection for safety-Protection against overcurrent, IEC 60601-2-17:2013-Medical electrical equipment-Part 2-17: Particular requirements for the basic safety and essential performance of automatically-controlled brachytherapy afterloading equipment, IEC 60335-2-83:2001/AMD1:2008-Amendment 1-Household and similar electrical appliances-Safety-Part 2-83: Particular requirements for heated gullies for roof drainage. Peruse this IEC 60601-2-20:2020-Medical electrical equipment-Part 2-20: Particular requirements for the basic safety and essential performance of infant transport incubators for the best info.
IEC TS 60034-27-5:2021-Rotating electrical machines-Part 27-5: Off-line measurement of partial discharge inception voltage on winding insulation under repetitive impulse voltage, IEC 62258-5:2006-Semiconductor die products-Part 5: Requirements for information concerning electrical simulation, IEC 60404-8-7:2020-Magnetic materials-Part 8-7: Specifications for individual materials-Cold-rolled grain-oriented electrical steel strip and sheet delivered in the fully-processed state, IEC 60034-2-1:2014-Rotating electrical machines-Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles), IEC 60335-2-61:2002-Household and similar electrical appliances-Safety-Part 2-61: Particular requirements for thermal storage room heaters, IEC 61557-3:2019-Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC-Equipment for testing, IEC 80601-2-71:2015-Medical electrical equipment-Part 2-71: Particular requirements for the basic safety and essential performance of functional near-infrared spectroscopy (NIRS) equipment, IEC 60335-2-4:2008/AMD2:2017-Amendment 2-Household and similar electrical appliances-Safety-Part 2-4: Particular requirements for spin extractors, IEC 62083:2009-Medical electrical equipment-Requirements for the safety of radiotherapy treatment planning systems, IEC 60601-2-52:2009/AMD1:2015-Amendment 1-Medical electrical equipment-Part 2-52: Particular requirements for the basic safety and essential performance of medical beds.